CompuSTAR 1WAMR-Fiance Bedienungsanleitung Seite 12

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 20
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 11
By Firstech, LLC 22
General System Functions
t@r
Hold button (III) for 2.5 seconds to release the trunk or hatch. If you are in range, the remote will beep once and the trunk icon will
illuminate indicating that the trunk release command has been successfully transmitted.
IMPORTANT : Trunk release is an optional vehicle feature that may require additional parts and labor.
a@o@O@w@rMd@O@s@d
Your system is equipped with two additional outputs that can be configured to control windows, open power sliding doors, open a power sliding
moon roof, or even turn on a rear defroster. These outputs can be configured for pulsed, timed or latched settings. Your authorized NuStart dealer
can set these outputs up accordingly. Using auxiliary outputs to control additional vehicle functions will require additional parts and can be rather
labor extensive.
Tap button (II) for 0.5 seconds to trigger auxiliary output 1. Tap button (III) for 0.5 seconds to trigger auxiliary output 2. The remote will beep once
and the aux icon will illuminate indicating that the auxiliary outputs have been triggered.
By default, the system is in secure auxiliary mode, which requires you to tap button (IV) for 0.5 seconds prior to triggering auxiliary 1 or 2. To turn
off secure auxiliary, ask your authorized NuStart dealer to turn on Option 4-5 to setting II.
23 By Firstech, LLC
General System Functions
t@@b@q
When in range of your vehicle, the remote will display the vehicle s temperature, battery voltage and remote battery voltage upon tapping
button (IV). The temperature will be displayed after tapping button (IV) for 0.5 seconds. Tap button (IV) a second time within four
seconds to display the vehicle s battery voltage. Tap button (IV) a third time within four seconds to display the remote s battery voltage.
If you tap button (IV) and you do not get any response from the remote, the remote pager is most likely out of range to receive commands.
s@a@O@d
Upon lock/arm and unlock/disarm, you can eliminate vehicle s audible confirmation by muting the siren. Normally, the siren will
chirp once to indicate the system is locked/armed and twice to indicate the system is unlocked/disarmed. To mute the siren tap
buttons (I+II) simultaneously for 0.5 seconds. When the siren is muted, the siren icon will no longer be displayed on the LCD.
IMPORTANT: Even when the siren is muted, it will still go off in the event the alarm is triggered.
Seitenansicht 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare