25 By Firstech, LLC By Firstech, LLC 24
General System Functions
r@m@O@v@m
All NuStart two-way LCD remotes have the option to be muted. To make the remote silent you must turn on vibration mode;
STEP1 : Enter remote programming mode by holding down buttons (II + III) simultaneously for 2.5 seconds. The remote will beep once and the
LCD will read Prog to indicate that you have successfully entered programming mode.
STEP2 : Scroll through the remote options by tapping button (IV) for 0.5 seconds. To set vibration mode tap button (IV) five times,
or until the vibration mode icon is flashing. If programming the NU3500R, simply tap button (IV) one time for 0.5 seconds after
entering remote programming mode.
STEP3 : Once the vibration icon is flashing, turn the feature on or off by tapping button (I) for 0.5 seconds. Exit remote programming by holding
down buttons (II + III) simultaneously for 2.5 seconds. The remote will beep three times indicating that you have successfully exited programming.
The vibration icon will remain illuminated on the LCD indicating the remote is in remote mute/vibration mode.
s@s@oOo
Hold buttons (I+III) simultaneously for 2.5 seconds to turn on and off the shock sensor. The remote will beep twice and the shock
sensor icon will illuminate to confirm the shock sensor is off. The remote will beep once and the shock sensor icon will disappear to
confirm the shock sensor is on. IMPORTANT: Turning off the shock sensor also turns off the optional sensor.
Adjusting the shock sensor sensitivity is done at the actual sensor, which is generally mounted somewhere under the vehicle s dashboard. The
higher the number on the dial means greater sensitivity to impact. The recommended dial setting for most vehicles is somewhere between 2 & 4.
If you are testing your sensor, please note that the shock sensor does not recognize impact for 30 seconds after the system has been armed.
Advanced System Functions
d@l@O@i@c@d@l
Tap buttons (I+IV) simultaneously for 0.5 seconds to turn on and off drive lock (also known as ignition controlled door locks). The remote will beep
once and the drive lock icon will illuminate to confirm that drive lock mode is activated. The remote will beep twice and the drive lock icon will
disappear to confirm drive lock is off.
IMPORTANT: Drive lock mode requires that the dealer turn on Option 1-9. Drive lock has two settings;
Default 1: Off
Option 2: Locks the doors when the ignition is on and after the brake is depressed.
Option 3: locks the doors when the RPM’s have reached two times that of idle speed (this setting requires that a tachometer wire is connected).
With both settings, the doors will unlock when the ignition is turned off. If using this feature on a manual transmission vehicle, the doors will unlock
upon setting the emergency / parking brake.
The following section reviews advanced system functions. Many of these functions require multiple steps or additional programming by your local
authorized NuStart dealer to be active.
(36 Seiten)
(14 Seiten)
(14 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern